Anchors for Concrete, Block, & Brick
Anchors for Hollow Block & Brick
Anchors for Wet Concrete
Female-Threaded Anchors
Light-Duty Plug-Style Anchors
Quick Drive Anchors
Removable Bolt Anchors
Screw Anchors
Sleeve Anchors
Wedge Anchors
Bolt & Screw Caps
Captive Panel Screws
Collated Screws
Drilling & Tapping Screws
Eye Bolts
Hex Head Bolts
Machine Screws
Round Head Bolts
Set Screws
Shoulder Screws
Socket Head Cap Screws
Socket Screw Plugs
Square Head Bolts
Thumb Screws
U-Bolts
Collated Nails
Nails
Cage Nuts & Spring Nuts
Cap Nuts
Eye Nuts
Flange Nuts
Hex Nuts
Push Nuts & Retainers
Square Nuts
T-Nuts for Wood
Thumb Nuts
Weld Nuts
External Retaining Rings
Internal Retaining Rings
Round Shims & Arbor Shims
Shim Stock
Wedge Shims
Heat-Set Inserts
Helical Inserts
Self-Locking Inserts
Self-Tapping Inserts
Double-End Threaded Rods & Studs
Fully-Threaded Rods & Studs
Chains
Pallet Jacks & Container Tilters
High-Lift Pallet Jacks & Container TiltersDrill Bit Size
Thread Length
Thread Size
Washer Outside Diameter
Anchor Diameter
Brand
Minimum Installation Depth
Nut Width
Overall Length
Material Grade Material
Anchor Type
Finish Type
Material Type
Clear Filters
Back to products
Steering Wheel Covers
$75,06 $110,52Price range: $75,06 through $110,52
Steel Wedge Anchors
$3,48 $1.288,25Price range: $3,48 through $1.288,25
0
People watching this product now!
Drill Bit Size
Thread Length
Thread Size
Washer Outside Diameter
Anchor Diameter
Brand
Minimum Installation Depth
Nut Width
Overall Length
Material Grade Material
Anchor Type
Finish Type
Material Type
Price
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
9 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$231,10
$231,10
4KHW7
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 9 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
191 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$240,31
$240,31
4KJG6
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 191 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
3-7/8 in
1"-8
1 in
APPROVED VENDOR
4-1/2 in
12 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$17,10
$17,10
31JP44
instock
Drill Bit Size: 1 in, Thread Length: 3-7/8 in, Thread Size: 1"-8, Anchor Diameter: 1 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4-1/2 in, Overall Length: 12 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
3-7/8 in
1"-8
1 in
APPROVED VENDOR
4-1/2 in
9 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$11,85
$11,85
31JP43
instock
Drill Bit Size: 1 in, Thread Length: 3-7/8 in, Thread Size: 1"-8, Anchor Diameter: 1 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4-1/2 in, Overall Length: 9 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-3/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
3-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$55,98
$55,98
46U124
instock
Drill Bit Size: 3/8 in, Thread Length: 2-3/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
7-1/2 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
10 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$14,99
$14,99
31JP37
instock
Drill Bit Size: 3/4 in, Thread Length: 7-1/2 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 10 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
3-1/2 in
3/8"-16
3/8 in
APPROVED VENDOR
1-1/2 in
5 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$10,13
$10,13
31JP16
instock
Drill Bit Size: 3/8 in, Thread Length: 3-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/2 in, Overall Length: 5 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-3/4 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
4-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$19,25
$19,25
31JP20
instock
Drill Bit Size: 1/2 in, Thread Length: 2-3/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 4-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
147 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$43,78
$43,78
44ZT63
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 147 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4-1/2 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$12,59
$12,59
31JP35
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/2 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1-5/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
3-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$12,07
$12,07
31JP24
instock
Drill Bit Size: 5/8 in, Thread Length: 1-5/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 3-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3-3/4 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
5-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$11,77
$11,77
31JP21
instock
Drill Bit Size: 1/2 in, Thread Length: 3-3/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 5-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
7 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$111,54
$111,54
4KHU6
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
177 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$59,56
$59,56
44ZT84
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 177 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1-1/4 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
2-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$70,59
$70,59
3A450
instock
Drill Bit Size: 1/2 in, Thread Length: 1-1/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 2-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
167 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$28,74
$28,74
44ZT87
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 167 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
117 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$50,55
$50,55
44ZT56
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 117 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
87 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$300,56
$300,56
4KJD4
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 87 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
2-1/4 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
3-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$159,98
$159,98
4KHT7
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 3-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
3 in
5/8"-11
5/8 in
DEWALT
2-3/8 in
0.9375 in
5 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$216,89
$216,89
448L38
instock
Drill Bit Size: 5/8 in, Thread Length: 3 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
7/8 in
4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
8 in
Grade 2 Steel
Wedge
Galvanized
Steel
$79,33
$79,33
21V005
instock
Drill Bit Size: 7/8 in, Thread Length: 4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 8 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
3-1/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
4-1/2 in
1.125 in
5-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$278,41
$278,41
30TC74
instock
Drill Bit Size: 3/4 in, Thread Length: 3-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
8-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$49,99
$49,99
21U901
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3-3/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
6-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$117,47
$117,47
46U144
instock
Drill Bit Size: 3/4 in, Thread Length: 3-3/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 6-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
5-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$35,81
$35,81
21U987
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
188 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$68,94
$68,94
44ZT28
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 188 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
237 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$41,16
$41,16
44ZT26
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 237 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
6-5/8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
3-7/8 in
0.9375 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$299,77
$299,77
30TC73
instock
Drill Bit Size: 5/8 in, Thread Length: 6-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
7 in
Grade 2 Steel
Wedge
Galvanized
Steel
$70,58
$70,58
21U988
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
117 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$44,65
$44,65
44ZT47
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 117 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
187 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$80,86
$80,86
44ZT29
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 187 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
7 in
Grade 2 Steel
Wedge
Galvanized
Steel
$36,52
$36,52
21U993
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
3-5/8 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
5-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$75,14
$75,14
3A463
instock
Drill Bit Size: 3/4 in, Thread Length: 3-5/8 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 5-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
107 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$323,11
$323,11
4KJD5
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 107 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-3/16 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
2-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$17,53
$17,53
21U879
instock
Drill Bit Size: 3/8 in, Thread Length: 1-3/16 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
147 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$289,20
$289,20
4KJE6
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 147 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
107 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$80,76
$80,76
44ZT92
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 107 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1-1/4 in
7-3/4 in
1-1/4"-7
2.5 in
1-1/4 in
DEWALT
5-1/2 in
12 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$289,35
$289,35
46U156
instock
Drill Bit Size: 1-1/4 in, Thread Length: 7-3/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: DEWALT, Minimum Installation Depth: 5-1/2 in, Overall Length: 12 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
152 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$252,15
$252,15
4KJE9
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 152 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
4-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$16,80
$16,80
21U890
instock
Drill Bit Size: 5/8 in, Thread Length: 2-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 4-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
152 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$290,03
$290,03
4KJH1
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 152 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-3/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$19,99
$19,99
21U895
instock
Drill Bit Size: 3/4 in, Thread Length: 2-3/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-3/4 in
1/2"-13
1/2 in
DEWALT
2 in
0.75 in
4-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$215,64
$215,64
448L34
instock
Drill Bit Size: 1/2 in, Thread Length: 2-3/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2 in, Nut Width: 0.75 in, Overall Length: 4-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
2-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
3-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$27,78
$27,78
21U985
instock
Drill Bit Size: 1/2 in, Thread Length: 2-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/2 in
5-1/2 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
7 in
Not Graded Steel
Wedge
Galvanized
Steel
$213,68
$213,68
15X104
instock
Drill Bit Size: 1/2 in, Thread Length: 5-1/2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
127 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$256,05
$256,05
4KJE5
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 127 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
77 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$48,95
$48,95
44ZT60
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 77 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
4-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$30,79
$30,79
21U986
instock
Drill Bit Size: 1/2 in, Thread Length: 3 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/8 in
1-5/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
2-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$21,02
$21,02
21U880
instock
Drill Bit Size: 3/8 in, Thread Length: 1-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-5/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$26,22
$26,22
21U882
instock
Drill Bit Size: 3/8 in, Thread Length: 2-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
4 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
12 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$166,78
$166,78
21U909
instock
Drill Bit Size: 1 in, Thread Length: 4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
77 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$295,38
$295,38
4KJD3
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 77 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
117 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$249,37
$249,37
4KJF4
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 117 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
65 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$431,79
$431,79
4KJC8
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 65 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
180 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$180,47
$180,47
4KJG1
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 180 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1/4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
3-1/4 in
0.9375 in
4-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$33,04
$33,04
21V022
instock
Drill Bit Size: 5/8 in, Thread Length: 1/4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-1/4 in, Nut Width: 0.9375 in, Overall Length: 4-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
5-1/2 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
3-1/4 in
0.9375 in
10 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$58,37
$58,37
21V025
instock
Drill Bit Size: 5/8 in, Thread Length: 5-1/2 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-1/4 in, Nut Width: 0.9375 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-5/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$40,45
$40,45
21U982
instock
Drill Bit Size: 3/8 in, Thread Length: 2-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/4 in
7/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
1-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$14,86
$14,86
21U877
instock
Drill Bit Size: 1/4 in, Thread Length: 7/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 1-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
2-3/4 in
7/8"-9
1.75 in
7/8 in
DEWALT
3-7/8 in
1.3125 in
6 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$136,31
$136,31
46U148
instock
Drill Bit Size: 7/8 in, Thread Length: 2-3/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 1.3125 in, Overall Length: 6 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
28 mm
M20
49 mm
28 mm
MKT FASTENING
150 mm
30 mm
201 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$253,95
$253,95
4KJH8
instock
Drill Bit Size: 28 mm, Thread Size: M20, Washer Outside Diameter: 49 mm, Anchor Diameter: 28 mm, Brand: MKT FASTENING, Minimum Installation Depth: 150 mm, Nut Width: 30 mm, Overall Length: 201 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
28 mm
M20
49 mm
28 mm
MKT FASTENING
150 mm
30 mm
201 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$87,91
$87,91
44ZT82
instock
Drill Bit Size: 28 mm, Thread Size: M20, Washer Outside Diameter: 49 mm, Anchor Diameter: 28 mm, Brand: MKT FASTENING, Minimum Installation Depth: 150 mm, Nut Width: 30 mm, Overall Length: 201 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
237 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$164,59
$164,59
4KJH7
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 237 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
187 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$323,50
$323,50
4KJH6
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 187 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
182 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$68,31
$68,31
44ZT78
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 182 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
182 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$273,29
$273,29
4KJF1
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 182 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
157 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$63,04
$63,04
44ZT64
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 157 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
157 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$252,15
$252,15
4KJH5
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 157 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
152 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$63,04
$63,04
44ZU05
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 152 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
137 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$240,59
$240,59
4KJH4
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 137 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
137 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$60,20
$60,20
44ZU01
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 137 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
132 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$58,08
$58,08
44ZT30
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 132 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
24 mm
M16
39 mm
24 mm
MKT FASTENING
120 mm
24 mm
132 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$230,79
$230,79
4KJE8
instock
Drill Bit Size: 24 mm, Thread Size: M16, Washer Outside Diameter: 39 mm, Anchor Diameter: 24 mm, Brand: MKT FASTENING, Minimum Installation Depth: 120 mm, Nut Width: 24 mm, Overall Length: 132 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
212 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$182,31
$182,31
4KJH3
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 212 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
212 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$45,18
$45,18
44ZT35
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 212 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
182 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$350,89
$350,89
4KJH2
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 182 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
182 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$65,81
$65,81
44ZT44
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 182 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
177 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$317,43
$317,43
4KJE7
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 177 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
152 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$54,22
$54,22
44ZT65
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 152 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
132 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$252,02
$252,02
4KJG9
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 132 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
132 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$47,30
$47,30
44ZU04
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 132 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
127 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$38,42
$38,42
44ZT52
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 127 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
122 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$42,03
$42,03
44ZT38
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 122 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
122 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$223,95
$223,95
4KJG8
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 122 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
117 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$238,17
$238,17
4KJE4
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 117 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
112 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$39,83
$39,83
44ZT46
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 112 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
112 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$212,43
$212,43
4KJG7
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 112 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
107 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$41,93
$41,93
44ZT25
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 107 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
18 mm
M12
30 mm
18 mm
MKT FASTENING
60 mm
19 mm
107 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$224,88
$224,88
4KJE3
instock
Drill Bit Size: 18 mm, Thread Size: M12, Washer Outside Diameter: 30 mm, Anchor Diameter: 18 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 19 mm, Overall Length: 107 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
191 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$60,10
$60,10
44ZT70
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 191 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
188 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$275,65
$275,65
4KJE2
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 188 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
141 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$230,41
$230,41
4KJG5
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 141 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
141 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$57,58
$57,58
44ZT79
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 141 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
138 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$58,76
$58,76
44ZT42
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 138 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
138 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$235,07
$235,07
4KJE1
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 138 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
121 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$56,78
$56,78
44ZT74
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 121 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
121 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$227,15
$227,15
4KJG4
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 121 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
118 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$227,15
$227,15
4KJD9
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 118 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
118 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$56,78
$56,78
44ZT98
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 118 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
111 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$213,89
$213,89
4KJG3
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 111 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
111 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$53,42
$53,42
44ZT49
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 111 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
108 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$44,10
$44,10
44ZT31
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 108 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
108 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$176,41
$176,41
4KJD8
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 108 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
96 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$192,37
$192,37
4KJG2
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 96 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
96 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$49,99
$49,99
44ZT45
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 96 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
93 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$166,52
$166,52
4KJD7
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 93 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
15 mm
M10
24 mm
15 mm
MKT FASTENING
85 mm
17 mm
93 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$40,58
$40,58
44ZT86
instock
Drill Bit Size: 15 mm, Thread Size: M10, Washer Outside Diameter: 24 mm, Anchor Diameter: 15 mm, Brand: MKT FASTENING, Minimum Installation Depth: 85 mm, Nut Width: 17 mm, Overall Length: 93 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
180 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$45,06
$45,06
44ZT73
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 180 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
130 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$41,87
$41,87
44ZT41
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 130 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
130 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$167,59
$167,59
4KJF9
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 130 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
127 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$150,03
$150,03
4KJD6
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 127 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
127 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$38,43
$38,43
44ZT39
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 127 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
110 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$323,11
$323,11
4KJF8
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 110 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
110 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$65,51
$65,51
44ZT40
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 110 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
90 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$298,36
$298,36
4KJF7
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 90 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
90 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$75,75
$75,75
44ZT88
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 90 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
87 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$75,14
$75,14
44ZT62
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 87 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
80 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$282,42
$282,42
4KJF6
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 80 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
80 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$70,67
$70,67
44ZT59
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 80 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
12 mm
M8
20 mm
12 mm
MKT FASTENING
70 mm
13 mm
77 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$60,38
$60,38
44ZT99
instock
Drill Bit Size: 12 mm, Thread Size: M8, Washer Outside Diameter: 20 mm, Anchor Diameter: 12 mm, Brand: MKT FASTENING, Minimum Installation Depth: 70 mm, Nut Width: 13 mm, Overall Length: 77 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
167 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$143,64
$143,64
4KJF5
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 167 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
115 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$265,34
$265,34
4KJD2
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 115 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
115 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$66,36
$66,36
44ZT94
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 115 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
97 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$232,90
$232,90
4KJF3
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 97 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
97 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$58,31
$58,31
44ZT68
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 97 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
95 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$232,90
$232,90
4KJD1
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 95 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
95 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$45,79
$45,79
44ZT66
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 95 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
75 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$45,13
$45,13
44ZT81
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 75 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
75 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$223,95
$223,95
4KJC9
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 75 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
67 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$437,30
$437,30
4KJF2
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 67 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
67 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$109,47
$109,47
44ZT27
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 67 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
10 mm
M6
18 mm
10 mm
MKT FASTENING
60 mm
10 mm
65 mm
Class 8.8 Steel
Wedge
Zinc Plated
Steel
$108,13
$108,13
44ZT34
instock
Drill Bit Size: 10 mm, Thread Size: M6, Washer Outside Diameter: 18 mm, Anchor Diameter: 10 mm, Brand: MKT FASTENING, Minimum Installation Depth: 60 mm, Nut Width: 10 mm, Overall Length: 65 mm, Material Grade Material: Class 8.8 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
12 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$267,93
$267,93
4KHW8
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 12 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
12 in
Grade 2 Steel
Wedge
Galvanized
Steel
$314,13
$314,13
21V011
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
12 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$261,08
$261,08
21U911
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1-1/4 in
4-3/4 in
1-1/4"-7
2.5 in
1-1/4 in
DEWALT
5-1/2 in
9 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$218,63
$218,63
46U155
instock
Drill Bit Size: 1-1/4 in, Thread Length: 4-3/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: DEWALT, Minimum Installation Depth: 5-1/2 in, Overall Length: 9 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
9 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$223,12
$223,12
21U910
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 9 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1-1/4 in
3-1/4 in
1-1/4"-7
2.5 in
1-1/4 in
MKT FASTENING
6-1/2 in
1.875 in
9 in
Grade 2 Steel
Wedge
Galvanized
Steel
$249,32
$249,32
21V010
instock
Drill Bit Size: 1-1/4 in, Thread Length: 3-1/4 in, Thread Size: 1-1/4"-7, Washer Outside Diameter: 2.5 in, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Nut Width: 1.875 in, Overall Length: 9 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1 in
8-3/8 in
1"-8
2 in
1 in
DEWALT
4-1/2 in
12 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$172,16
$172,16
46U154
instock
Drill Bit Size: 1 in, Thread Length: 8-3/8 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Overall Length: 12 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
4 in
1"-8
2 in
1 in
MKT FASTENING
9 in
1.5 in
12 in
Grade 2 Steel
Wedge
Galvanized
Steel
$138,86
$138,86
21V009
instock
Drill Bit Size: 1 in, Thread Length: 4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 9 in, Nut Width: 1.5 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1 in
5-3/8 in
1"-8
2 in
1 in
DEWALT
4-1/2 in
9 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$268,41
$268,41
46U153
instock
Drill Bit Size: 1 in, Thread Length: 5-3/8 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Overall Length: 9 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
4 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
9 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$97,12
$97,12
21U908
instock
Drill Bit Size: 1 in, Thread Length: 4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 9 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
4 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
9 in
Grade 2 Steel
Wedge
Galvanized
Steel
$115,27
$115,27
21V008
instock
Drill Bit Size: 1 in, Thread Length: 4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 9 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1 in
2-1/4 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
9 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$221,26
$221,26
4KHW6
instock
Drill Bit Size: 1 in, Thread Length: 2-1/4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 9 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1 in
3-1/2 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
6 in
Grade 2 Steel
Wedge
Galvanized
Steel
$87,68
$87,68
21V007
instock
Drill Bit Size: 1 in, Thread Length: 3-1/2 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1 in
3-1/2 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
6 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$79,58
$79,58
21U907
instock
Drill Bit Size: 1 in, Thread Length: 3-1/2 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
2-7/8 in
1"-8
1 in
APPROVED VENDOR
4-1/2 in
6 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$9,58
$9,58
31JP42
instock
Drill Bit Size: 1 in, Thread Length: 2-7/8 in, Thread Size: 1"-8, Anchor Diameter: 1 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4-1/2 in, Overall Length: 6 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
2-3/8 in
1"-8
2 in
1 in
DEWALT
4-1/2 in
6 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$202,12
$202,12
46U152
instock
Drill Bit Size: 1 in, Thread Length: 2-3/8 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Overall Length: 6 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
2-1/4 in
1"-8
2 in
1 in
MKT FASTENING
4-1/2 in
1.5 in
6 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$189,44
$189,44
4KHW5
instock
Drill Bit Size: 1 in, Thread Length: 2-1/4 in, Thread Size: 1"-8, Washer Outside Diameter: 2 in, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.5 in, Overall Length: 6 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1-1/4 in
1"-8
1-1/4 in
MKT FASTENING
6-1/2 in
5-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$36,34
$36,34
21DC04
instock
Drill Bit Size: 1-1/4 in, Thread Size: 1"-8, Anchor Diameter: 1-1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 6-1/2 in, Overall Length: 5-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
6-3/4 in
7/8"-9
1.75 in
7/8 in
DEWALT
3-7/8 in
1.3125 in
10 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$228,28
$228,28
46U151
instock
Drill Bit Size: 7/8 in, Thread Length: 6-3/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 1.3125 in, Overall Length: 10 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
10 in
Grade 2 Steel
Wedge
Galvanized
Steel
$99,99
$99,99
21V006
instock
Drill Bit Size: 7/8 in, Thread Length: 4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
7/8 in
4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
10 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$80,35
$80,35
21U906
instock
Drill Bit Size: 7/8 in, Thread Length: 4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
3-7/8 in
7/8"-9
7/8 in
APPROVED VENDOR
4 in
10 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$19,55
$19,55
31JP41
instock
Drill Bit Size: 7/8 in, Thread Length: 3-7/8 in, Thread Size: 7/8"-9, Anchor Diameter: 7/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4 in, Overall Length: 10 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
2-1/4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
10 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$185,37
$185,37
4KHW4
instock
Drill Bit Size: 7/8 in, Thread Length: 2-1/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 10 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
7/8 in
4-3/4 in
7/8"-9
1.75 in
7/8 in
DEWALT
3-7/8 in
1.3125 in
8 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$182,51
$182,51
46U150
instock
Drill Bit Size: 7/8 in, Thread Length: 4-3/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 1.3125 in, Overall Length: 8 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
8 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$71,33
$71,33
21U905
instock
Drill Bit Size: 7/8 in, Thread Length: 4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 8 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
3-7/8 in
7/8"-9
7/8 in
APPROVED VENDOR
4 in
8 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$15,67
$15,67
31JP40
instock
Drill Bit Size: 7/8 in, Thread Length: 3-7/8 in, Thread Size: 7/8"-9, Anchor Diameter: 7/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4 in, Overall Length: 8 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
2-1/4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
8 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$149,41
$149,41
4KHW3
instock
Drill Bit Size: 7/8 in, Thread Length: 2-1/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 8 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
7/8 in
3-1/2 in
7/8"-9
7/8 in
APPROVED VENDOR
4 in
6 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$13,59
$13,59
31JP39
instock
Drill Bit Size: 7/8 in, Thread Length: 3-1/2 in, Thread Size: 7/8"-9, Anchor Diameter: 7/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4 in, Overall Length: 6 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
3-1/2 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
6 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$53,59
$53,59
21U904
instock
Drill Bit Size: 7/8 in, Thread Length: 3-1/2 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
3-1/2 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
6 in
Grade 2 Steel
Wedge
Galvanized
Steel
$69,96
$69,96
21V004
instock
Drill Bit Size: 7/8 in, Thread Length: 3-1/2 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
7/8 in
2-1/4 in
7/8"-9
1.75 in
7/8 in
MKT FASTENING
4 in
1.3125 in
6 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$144,00
$144,00
4KHW2
instock
Drill Bit Size: 7/8 in, Thread Length: 2-1/4 in, Thread Size: 7/8"-9, Washer Outside Diameter: 1.75 in, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4 in, Nut Width: 1.3125 in, Overall Length: 6 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
9-1/2 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
12 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$149,54
$149,54
46U149
instock
Drill Bit Size: 3/4 in, Thread Length: 9-1/2 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 12 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
12 in
Grade 2 Steel
Wedge
Galvanized
Steel
$99,99
$99,99
21V003
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
12 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$66,78
$66,78
21U903
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 12 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3-1/4 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
12 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$21,08
$21,08
31JP38
instock
Drill Bit Size: 3/4 in, Thread Length: 3-1/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 12 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
7-1/2 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
10 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$98,79
$98,79
46U147
instock
Drill Bit Size: 3/4 in, Thread Length: 7-1/2 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 10 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
5-3/4 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
10 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$164,34
$164,34
3A467
instock
Drill Bit Size: 3/4 in, Thread Length: 5-3/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 10 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
10 in
Grade 2 Steel
Wedge
Galvanized
Steel
$62,72
$62,72
21V002
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
10 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$112,82
$112,82
21U902
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
10 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$151,89
$151,89
4KHW1
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 10 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
6-1/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
4-1/2 in
1.125 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$174,16
$174,16
30TC77
instock
Drill Bit Size: 3/4 in, Thread Length: 6-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
6 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
8-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$24,98
$24,98
31JP36
instock
Drill Bit Size: 3/4 in, Thread Length: 6 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 8-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
6 in
3/4"-10
3/4 in
DEWALT
3-3/8 in
1.125 in
8-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$160,68
$160,68
448L44
instock
Drill Bit Size: 3/4 in, Thread Length: 6 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/4 in
6 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$88,40
$88,40
46U146
instock
Drill Bit Size: 3/4 in, Thread Length: 6 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
5-3/4 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
8-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$143,35
$143,35
3A466
instock
Drill Bit Size: 3/4 in, Thread Length: 5-3/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 8-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
8-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$64,97
$64,97
21V001
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
8-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$152,76
$152,76
4KHV9
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
5-1/8 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$113,96
$113,96
3A465
instock
Drill Bit Size: 3/4 in, Thread Length: 5-1/8 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4-3/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
4-1/2 in
1.125 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$305,96
$305,96
30TC76
instock
Drill Bit Size: 3/4 in, Thread Length: 4-3/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4-1/2 in
3/4"-10
3/4 in
DEWALT
3-3/8 in
1.125 in
7 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$292,47
$292,47
448L43
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/2 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/4 in
4-1/2 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$127,92
$127,92
46U145
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/2 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
7 in
Grade 2 Steel
Wedge
Galvanized
Steel
$53,24
$53,24
21U999
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
7 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$49,99
$49,99
21U899
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
7 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$135,62
$135,62
4KHV8
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 7 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
4-3/8 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
6-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$95,79
$95,79
3A464
instock
Drill Bit Size: 3/4 in, Thread Length: 4-3/8 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 6-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4-1/4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
6-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$41,47
$41,47
21U998
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 6-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
4-1/4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
6-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$175,75
$175,75
4KHV7
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 6-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
4-1/4 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
6-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$24,97
$24,97
21U898
instock
Drill Bit Size: 3/4 in, Thread Length: 4-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 6-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
4-1/2 in
1.125 in
6-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$295,70
$295,70
30TC75
instock
Drill Bit Size: 3/4 in, Thread Length: 4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 4-1/2 in, Nut Width: 1.125 in, Overall Length: 6-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3-3/4 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
6-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$11,30
$11,30
31JP34
instock
Drill Bit Size: 3/4 in, Thread Length: 3-3/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 6-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3-5/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
5-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$38,58
$38,58
21U997
instock
Drill Bit Size: 3/4 in, Thread Length: 3-5/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
3-5/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
5-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$22,49
$22,49
21U897
instock
Drill Bit Size: 3/4 in, Thread Length: 3-5/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3-5/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
5-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$146,16
$146,16
4KHV6
instock
Drill Bit Size: 3/4 in, Thread Length: 3-5/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
3 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
5-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$10,09
$10,09
31JP33
instock
Drill Bit Size: 3/4 in, Thread Length: 3 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 5-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
3 in
3/4"-10
3/4 in
DEWALT
3-3/8 in
1.125 in
5-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$253,98
$253,98
448L42
instock
Drill Bit Size: 3/4 in, Thread Length: 3 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/4 in
3 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
5-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$103,31
$103,31
46U143
instock
Drill Bit Size: 3/4 in, Thread Length: 3 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-7/8 in
3/4"-10
3/4 in
RED HEAD
3-1/2 in
4-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$80,87
$80,87
3A462
instock
Drill Bit Size: 3/4 in, Thread Length: 2-7/8 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: RED HEAD, Minimum Installation Depth: 3-1/2 in, Overall Length: 4-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-7/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$20,97
$20,97
21U896
instock
Drill Bit Size: 3/4 in, Thread Length: 2-7/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-7/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-3/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$163,27
$163,27
4KHV5
instock
Drill Bit Size: 3/4 in, Thread Length: 2-7/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-3/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
2-7/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$35,84
$35,84
21U996
instock
Drill Bit Size: 3/4 in, Thread Length: 2-7/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
2-1/4 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
4-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$10,07
$10,07
31JP32
instock
Drill Bit Size: 3/4 in, Thread Length: 2-1/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 4-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-1/4 in
3/4"-10
3/4 in
DEWALT
3-3/8 in
1.125 in
4-3/4 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$255,35
$255,35
448L41
instock
Drill Bit Size: 3/4 in, Thread Length: 2-1/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/4 in
2-1/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
4-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$102,26
$102,26
46U142
instock
Drill Bit Size: 3/4 in, Thread Length: 2-1/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1 in
3/4"-10
1 in
MKT FASTENING
5-3/4 in
4-5/8 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$8,51
$8,51
21DC03
instock
Drill Bit Size: 1 in, Thread Size: 3/4"-10, Anchor Diameter: 1 in, Brand: MKT FASTENING, Minimum Installation Depth: 5-3/4 in, Overall Length: 4-5/8 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
2-3/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$162,55
$162,55
4KHV4
instock
Drill Bit Size: 3/4 in, Thread Length: 2-3/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/4 in
2-3/8 in
3/4"-10
1.469 in
3/4 in
MKT FASTENING
3-3/8 in
1.125 in
4-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$34,29
$34,29
21U995
instock
Drill Bit Size: 3/4 in, Thread Length: 2-3/8 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.469 in, Anchor Diameter: 3/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/4 in
1-3/4 in
3/4"-10
3/4 in
APPROVED VENDOR
3-1/4 in
4-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$8,93
$8,93
31JP31
instock
Drill Bit Size: 3/4 in, Thread Length: 1-3/4 in, Thread Size: 3/4"-10, Anchor Diameter: 3/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 3-1/4 in, Overall Length: 4-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/4 in
1-3/4 in
3/4"-10
1.4688 in
3/4 in
DEWALT
3-3/8 in
1.125 in
4-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$91,78
$91,78
46U141
instock
Drill Bit Size: 3/4 in, Thread Length: 1-3/4 in, Thread Size: 3/4"-10, Washer Outside Diameter: 1.4688 in, Anchor Diameter: 3/4 in, Brand: DEWALT, Minimum Installation Depth: 3-3/8 in, Nut Width: 1.125 in, Overall Length: 4-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
10 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$202,02
$202,02
46U140
instock
Drill Bit Size: 5/8 in, Thread Length: 8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 10 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
7-13/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
10 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$11,39
$11,39
31JP30
instock
Drill Bit Size: 5/8 in, Thread Length: 7-13/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 10 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
10 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$92,31
$92,31
21U894
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 10 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
6-1/2 in
5/8"-11
5/8 in
DEWALT
2-3/8 in
0.9375 in
8-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$392,06
$392,06
448L40
instock
Drill Bit Size: 5/8 in, Thread Length: 6-1/2 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
5/8 in
6-1/2 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$150,31
$150,31
46U139
instock
Drill Bit Size: 5/8 in, Thread Length: 6-1/2 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
6-5/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
8-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$10,44
$10,44
31JP29
instock
Drill Bit Size: 5/8 in, Thread Length: 6-5/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 8-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
5-3/4 in
5/8"-11
5/8 in
RED HEAD
2-1/2 in
8-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$96,04
$96,04
3A460
instock
Drill Bit Size: 5/8 in, Thread Length: 5-3/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: RED HEAD, Minimum Installation Depth: 2-1/2 in, Overall Length: 8-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
3-1/4 in
0.9375 in
8-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$38,99
$38,99
21V024
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-1/4 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
8-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$39,36
$39,36
21U994
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
8-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$209,11
$209,11
4KHV3
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 8-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
5-1/4 in
5/8"-11
5/8 in
RED HEAD
2-1/2 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$79,41
$79,41
3A459
instock
Drill Bit Size: 5/8 in, Thread Length: 5-1/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: RED HEAD, Minimum Installation Depth: 2-1/2 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
5-1/8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
3-7/8 in
0.9375 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$227,72
$227,72
30TC72
instock
Drill Bit Size: 5/8 in, Thread Length: 5-1/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 0.9375 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
5 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$119,99
$119,99
46U138
instock
Drill Bit Size: 5/8 in, Thread Length: 5 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4-13/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$9,74
$9,74
31JP28
instock
Drill Bit Size: 5/8 in, Thread Length: 4-13/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
3-3/8 in
0.9375 in
7 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$163,69
$163,69
808JG2
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-3/8 in, Nut Width: 0.9375 in, Overall Length: 7 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
7 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$28,18
$28,18
21U893
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-1/4 in
5/8"-11
5/8 in
APPROVED VENDOR
4 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$584,87
$584,87
4YJA8
instock
Drill Bit Size: 5/8 in, Thread Length: 2-1/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 4 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4-1/4 in
5/8"-11
5/8 in
RED HEAD
2-1/2 in
6 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$55,75
$55,75
3A458
instock
Drill Bit Size: 5/8 in, Thread Length: 4-1/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: RED HEAD, Minimum Installation Depth: 2-1/2 in, Overall Length: 6 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4-1/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
6 in
Grade 2 Steel
Wedge
Galvanized
Steel
$30,36
$30,36
21U992
instock
Drill Bit Size: 5/8 in, Thread Length: 4-1/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
5/8 in
4-1/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
6 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$142,52
$142,52
4KHV1
instock
Drill Bit Size: 5/8 in, Thread Length: 4-1/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
4-1/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
6 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$19,90
$19,90
21U892
instock
Drill Bit Size: 5/8 in, Thread Length: 4-1/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4-1/8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
3-7/8 in
0.9375 in
6 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$225,09
$225,09
30TC71
instock
Drill Bit Size: 5/8 in, Thread Length: 4-1/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
5/8 in
DEWALT
2-3/8 in
0.9375 in
6 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$226,83
$226,83
448L39
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
5/8 in
4 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
6 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$99,05
$99,05
46U137
instock
Drill Bit Size: 5/8 in, Thread Length: 4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
3-13/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
6 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$7,63
$7,63
31JP27
instock
Drill Bit Size: 5/8 in, Thread Length: 3-13/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 6 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1-1/2 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
3-1/4 in
0.9375 in
6 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$36,80
$36,80
21V023
instock
Drill Bit Size: 5/8 in, Thread Length: 1-1/2 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-1/4 in, Nut Width: 0.9375 in, Overall Length: 6 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
3-1/4 in
5/8"-11
5/8 in
RED HEAD
2-1/2 in
5 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$49,99
$49,99
3A457
instock
Drill Bit Size: 5/8 in, Thread Length: 3-1/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: RED HEAD, Minimum Installation Depth: 2-1/2 in, Overall Length: 5 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
3-1/4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
5 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$18,89
$18,89
21U891
instock
Drill Bit Size: 5/8 in, Thread Length: 3-1/4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
3-1/4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
5 in
Grade 2 Steel
Wedge
Galvanized
Steel
$27,30
$27,30
21U991
instock
Drill Bit Size: 5/8 in, Thread Length: 3-1/4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
5/8 in
3-1/4 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
5 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$131,24
$131,24
4KHU9
instock
Drill Bit Size: 5/8 in, Thread Length: 3-1/4 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
3 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
5 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$92,14
$92,14
46U136
instock
Drill Bit Size: 5/8 in, Thread Length: 3 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-7/8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
3-7/8 in
0.9375 in
5 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$170,94
$170,94
30TC69
instock
Drill Bit Size: 5/8 in, Thread Length: 2-7/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 0.9375 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-13/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
5 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$5,80
$5,80
31JP26
instock
Drill Bit Size: 5/8 in, Thread Length: 2-13/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 5 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-7/8 in
5/8"-11
1.3125 in
5/8 in
DEWALT
3-7/8 in
0.9375 in
4-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$222,92
$222,92
30TC70
instock
Drill Bit Size: 5/8 in, Thread Length: 2-7/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 3-7/8 in, Nut Width: 0.9375 in, Overall Length: 4-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
4-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$24,77
$24,77
21U990
instock
Drill Bit Size: 5/8 in, Thread Length: 2-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 4-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
5/8 in
2-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
4-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$118,48
$118,48
4KHU8
instock
Drill Bit Size: 5/8 in, Thread Length: 2-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 4-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
2-1/2 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
4-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$84,35
$84,35
46U135
instock
Drill Bit Size: 5/8 in, Thread Length: 2-1/2 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 4-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
2-5/16 in
5/8"-11
5/8 in
APPROVED VENDOR
2-3/4 in
4-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$13,19
$13,19
31JP25
instock
Drill Bit Size: 5/8 in, Thread Length: 2-5/16 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-3/4 in, Overall Length: 4-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
7/8 in
5/8"-11
7/8 in
MKT FASTENING
5 in
4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$19,99
$19,99
21DC02
instock
Drill Bit Size: 7/8 in, Thread Size: 5/8"-11, Anchor Diameter: 7/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 5 in, Overall Length: 4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1-3/4 in
5/8"-11
5/8 in
RED HEAD
2-1/2 in
3-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$47,45
$47,45
3A455
instock
Drill Bit Size: 5/8 in, Thread Length: 1-3/4 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: RED HEAD, Minimum Installation Depth: 2-1/2 in, Overall Length: 3-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
3-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$15,80
$15,80
21U889
instock
Drill Bit Size: 5/8 in, Thread Length: 1-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 3-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
3-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$110,43
$110,43
4KHU7
instock
Drill Bit Size: 5/8 in, Thread Length: 1-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 3-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
5/8 in
1-5/8 in
5/8"-11
1.312 in
5/8 in
MKT FASTENING
2-3/4 in
0.9375 in
3-1/2 in
Grade 2 Steel
Wedge
Galvanized
Steel
$21,33
$21,33
21U989
instock
Drill Bit Size: 5/8 in, Thread Length: 1-5/8 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.312 in, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 3-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
5/8 in
1-1/2 in
5/8"-11
5/8 in
DEWALT
2-3/8 in
0.9375 in
3-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$164,91
$164,91
448L37
instock
Drill Bit Size: 5/8 in, Thread Length: 1-1/2 in, Thread Size: 5/8"-11, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.9375 in, Overall Length: 3-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
5/8 in
1-1/2 in
5/8"-11
1.3125 in
5/8 in
DEWALT
2-3/4 in
0.9375 in
3-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$86,12
$86,12
46U134
instock
Drill Bit Size: 5/8 in, Thread Length: 1-1/2 in, Thread Size: 5/8"-11, Washer Outside Diameter: 1.3125 in, Anchor Diameter: 5/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/4 in, Nut Width: 0.9375 in, Overall Length: 3-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
8-1/4 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
10 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$172,62
$172,62
46U133
instock
Drill Bit Size: 1/2 in, Thread Length: 8-1/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 10 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
6-7/8 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/2 in
0.75 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$147,55
$147,55
30TC68
instock
Drill Bit Size: 1/2 in, Thread Length: 6-7/8 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
6-3/4 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
8-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$16,15
$16,15
31JP23
instock
Drill Bit Size: 1/2 in, Thread Length: 6-3/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 8-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
6-3/4 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
8-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$105,73
$105,73
46U132
instock
Drill Bit Size: 1/2 in, Thread Length: 6-3/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 8-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
5-1/2 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$107,40
$107,40
3A454
instock
Drill Bit Size: 1/2 in, Thread Length: 5-1/2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
5-1/4 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$12,83
$12,83
31JP22
instock
Drill Bit Size: 1/2 in, Thread Length: 5-1/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
5-1/4 in
1/2"-13
1/2 in
DEWALT
2 in
0.75 in
7 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$167,80
$167,80
448L36
instock
Drill Bit Size: 1/2 in, Thread Length: 5-1/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
5-1/4 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$75,19
$75,19
46U131
instock
Drill Bit Size: 1/2 in, Thread Length: 5-1/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
7 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$27,58
$27,58
21U888
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/2 in
0.75 in
7 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$63,46
$63,46
21V021
instock
Drill Bit Size: 1/2 in, Thread Length: 3-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-7/8 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/2 in
0.75 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$130,63
$130,63
30TC67
instock
Drill Bit Size: 1/2 in, Thread Length: 2-7/8 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
5-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$70,72
$70,72
3A453
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 5-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.055 in
1/2 in
RED HEAD
6 in
0.736 in
5-1/2 in
Not Graded Steel
Wedge
Galvanized
Steel
$173,44
$173,44
824L35
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.055 in, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 6 in, Nut Width: 0.736 in, Overall Length: 5-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
5-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$20,75
$20,75
21U887
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
5-1/2 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$180,41
$180,41
4KHU5
instock
Drill Bit Size: 1/2 in, Thread Length: 4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1/2 in
3-7/8 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/2 in
0.75 in
5-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$220,41
$220,41
30TC66
instock
Drill Bit Size: 1/2 in, Thread Length: 3-7/8 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3-3/4 in
1/2"-13
1/2 in
DEWALT
2 in
0.75 in
5-1/2 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$241,93
$241,93
448L35
instock
Drill Bit Size: 1/2 in, Thread Length: 3-3/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
3-3/4 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
5-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$126,97
$126,97
46U130
instock
Drill Bit Size: 1/2 in, Thread Length: 3-3/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/2 in
0.75 in
5-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$56,36
$56,36
21V020
instock
Drill Bit Size: 1/2 in, Thread Length: 2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 5-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
4-1/2 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$74,48
$74,48
15X102
instock
Drill Bit Size: 1/2 in, Thread Length: 3 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 4-1/2 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-7/8 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/2 in
0.75 in
4-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$207,36
$207,36
30TC65
instock
Drill Bit Size: 1/2 in, Thread Length: 2-7/8 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 4-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-3/4 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
4-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$107,09
$107,09
46U129
instock
Drill Bit Size: 1/2 in, Thread Length: 2-3/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 4-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/2 in
0.75 in
4-1/2 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$56,30
$56,30
21V019
instock
Drill Bit Size: 1/2 in, Thread Length: 1 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 4-1/2 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
4-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$18,40
$18,40
21U886
instock
Drill Bit Size: 1/2 in, Thread Length: 3 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
3 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
4-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$154,96
$154,96
4KHU4
instock
Drill Bit Size: 1/2 in, Thread Length: 3 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 4-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1/2 in
2-3/4 in
1/2"-13
1.055 in
1/2 in
RED HEAD
6 in
0.736 in
4-1/4 in
Not Graded Steel
Wedge
Galvanized
Steel
$148,68
$148,68
824L34
instock
Drill Bit Size: 1/2 in, Thread Length: 2-3/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.055 in, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 6 in, Nut Width: 0.736 in, Overall Length: 4-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/2 in
2-1/2 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
4-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$17,52
$17,52
31JP19
instock
Drill Bit Size: 1/2 in, Thread Length: 2-1/2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 4-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
3-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$17,40
$17,40
21U885
instock
Drill Bit Size: 1/2 in, Thread Length: 2-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-1/4 in
1/2"-13
1/2 in
RED HEAD
1-7/8 in
3-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$61,85
$61,85
3A451
instock
Drill Bit Size: 1/2 in, Thread Length: 2-1/4 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: RED HEAD, Minimum Installation Depth: 1-7/8 in, Overall Length: 3-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2-1/8 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/2 in
0.75 in
3-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$190,25
$190,25
30TC64
instock
Drill Bit Size: 1/2 in, Thread Length: 2-1/8 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
3-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$16,05
$16,05
31JP18
instock
Drill Bit Size: 1/2 in, Thread Length: 2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 3-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2 in
1/2"-13
1/2 in
DEWALT
2 in
0.75 in
3-3/4 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$218,58
$218,58
448L33
instock
Drill Bit Size: 1/2 in, Thread Length: 2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
2 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
3-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$87,06
$87,06
46U128
instock
Drill Bit Size: 1/2 in, Thread Length: 2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1/4 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/2 in
0.75 in
3-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$53,38
$53,38
21V018
instock
Drill Bit Size: 1/2 in, Thread Length: 1/4 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/2 in, Nut Width: 0.75 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
5/8 in
1/2"-13
5/8 in
MKT FASTENING
4-1/4 in
3-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$7,05
$7,05
21DC01
instock
Drill Bit Size: 5/8 in, Thread Size: 1/2"-13, Anchor Diameter: 5/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 4-1/4 in, Overall Length: 3-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
2 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
2-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$846,61
$846,61
4YJF8
instock
Drill Bit Size: 1/2 in, Thread Length: 2 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 2-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
2-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$26,36
$26,36
21U984
instock
Drill Bit Size: 1/2 in, Thread Length: 1-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/2 in
1-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
2-3/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$134,39
$134,39
4KHU3
instock
Drill Bit Size: 1/2 in, Thread Length: 1-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1/2 in
1-1/2 in
1/2"-13
1.062 in
1/2 in
MKT FASTENING
2-1/4 in
0.75 in
2-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$14,69
$14,69
21U884
instock
Drill Bit Size: 1/2 in, Thread Length: 1-1/2 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.062 in, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1 in
1/2"-13
1/2 in
APPROVED VENDOR
2-1/4 in
2-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$14,96
$14,96
31JP17
instock
Drill Bit Size: 1/2 in, Thread Length: 1 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 2-1/4 in, Overall Length: 2-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/2 in
1 in
1/2"-13
1/2 in
DEWALT
2 in
0.75 in
2-3/4 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$185,19
$185,19
448L32
instock
Drill Bit Size: 1/2 in, Thread Length: 1 in, Thread Size: 1/2"-13, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2 in, Nut Width: 0.75 in, Overall Length: 2-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
1 in
1/2"-13
1.0625 in
1/2 in
DEWALT
2-1/4 in
0.75 in
2-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$86,08
$86,08
46U127
instock
Drill Bit Size: 1/2 in, Thread Length: 1 in, Thread Size: 1/2"-13, Washer Outside Diameter: 1.0625 in, Anchor Diameter: 1/2 in, Brand: DEWALT, Minimum Installation Depth: 2-1/4 in, Nut Width: 0.75 in, Overall Length: 2-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
5-5/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
7 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$98,86
$98,86
46U126
instock
Drill Bit Size: 3/8 in, Thread Length: 5-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
5-1/2 in
3/8"-16
3/8 in
DEWALT
1-3/4 in
0.5625 in
7 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$145,48
$145,48
448L31
instock
Drill Bit Size: 3/8 in, Thread Length: 5-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-3/4 in, Nut Width: 0.5625 in, Overall Length: 7 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/8 in
3-7/8 in
3/8"-16
3/8 in
RED HEAD
1-3/4 in
7 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$172,43
$172,43
15X109
instock
Drill Bit Size: 3/8 in, Thread Length: 3-7/8 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: RED HEAD, Minimum Installation Depth: 1-3/4 in, Overall Length: 7 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
4 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
5 in
Grade 2 Steel
Wedge
Galvanized
Steel
$49,99
$49,99
21U983
instock
Drill Bit Size: 3/8 in, Thread Length: 4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/8 in
4 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
5 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$36,76
$36,76
21U883
instock
Drill Bit Size: 3/8 in, Thread Length: 4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
4 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
5 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$121,42
$121,42
4KHU2
instock
Drill Bit Size: 3/8 in, Thread Length: 4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/8 in
3-3/4 in
3/8"-16
3/8 in
RED HEAD
1-3/4 in
5 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$93,31
$93,31
3A449
instock
Drill Bit Size: 3/8 in, Thread Length: 3-3/4 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: RED HEAD, Minimum Installation Depth: 1-3/4 in, Overall Length: 5 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
3-3/4 in
3/8"-16
0.8125 in
3/8 in
DEWALT
2-3/8 in
0.5625 in
5 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$143,30
$143,30
30TC63
instock
Drill Bit Size: 3/8 in, Thread Length: 3-3/4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
3-5/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
5 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$67,58
$67,58
46U125
instock
Drill Bit Size: 3/8 in, Thread Length: 3-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
3-1/2 in
3/8"-16
3/8 in
DEWALT
1-3/4 in
0.5625 in
5 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$119,45
$119,45
448L30
instock
Drill Bit Size: 3/8 in, Thread Length: 3-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-3/4 in, Nut Width: 0.5625 in, Overall Length: 5 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/8 in
2-5/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3-3/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$112,51
$112,51
4KHU1
instock
Drill Bit Size: 3/8 in, Thread Length: 2-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/8 in
2-1/2 in
3/8"-16
3/8 in
RED HEAD
1-3/4 in
3-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$82,91
$82,91
3A448
instock
Drill Bit Size: 3/8 in, Thread Length: 2-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: RED HEAD, Minimum Installation Depth: 1-3/4 in, Overall Length: 3-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-1/2 in
3/8"-16
0.8125 in
3/8 in
DEWALT
2-3/8 in
0.5625 in
3-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$116,95
$116,95
30TC62
instock
Drill Bit Size: 3/8 in, Thread Length: 2-1/2 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-3/8 in
3/8"-16
3/8 in
DEWALT
1-3/4 in
0.5625 in
3-3/4 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$108,21
$108,21
448L29
instock
Drill Bit Size: 3/8 in, Thread Length: 2-3/8 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-3/4 in, Nut Width: 0.5625 in, Overall Length: 3-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
3/8 in
2-1/4 in
3/8"-16
3/8 in
APPROVED VENDOR
1-1/2 in
3-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$8,80
$8,80
31JP15
instock
Drill Bit Size: 3/8 in, Thread Length: 2-1/4 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/2 in, Overall Length: 3-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-1/4 in
3/8"-16
0.8125 in
3/8 in
DEWALT
2-3/8 in
0.5625 in
3-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$127,62
$127,62
30TC61
instock
Drill Bit Size: 3/8 in, Thread Length: 2-1/4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.5625 in, Overall Length: 3-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
2-1/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
3-1/2 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$64,93
$64,93
46U123
instock
Drill Bit Size: 3/8 in, Thread Length: 2-1/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3-1/2 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-7/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3 in
Grade 2 Steel
Wedge
Galvanized
Steel
$36,18
$36,18
21U981
instock
Drill Bit Size: 3/8 in, Thread Length: 1-7/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/8 in
1-7/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$24,32
$24,32
21U881
instock
Drill Bit Size: 3/8 in, Thread Length: 1-7/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-7/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
3 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$110,74
$110,74
4KHT9
instock
Drill Bit Size: 3/8 in, Thread Length: 1-7/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/8 in
1-3/4 in
3/8"-16
0.8125 in
3/8 in
DEWALT
2-3/8 in
0.5625 in
3 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$117,96
$117,96
30TC60
instock
Drill Bit Size: 3/8 in, Thread Length: 1-3/4 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 2-3/8 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-5/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
3 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$53,14
$53,14
46U122
instock
Drill Bit Size: 3/8 in, Thread Length: 1-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-1/2 in
3/8"-16
3/8 in
APPROVED VENDOR
1-1/2 in
3 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$8,34
$8,34
31JP14
instock
Drill Bit Size: 3/8 in, Thread Length: 1-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/2 in, Overall Length: 3 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-1/2 in
3/8"-16
3/8 in
DEWALT
1-3/4 in
0.5625 in
3 in
Medium Carbon Steel
Wedge
Hot Dipped Galvanized
Steel
$87,29
$87,29
448L28
instock
Drill Bit Size: 3/8 in, Thread Length: 1-1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-3/4 in, Nut Width: 0.5625 in, Overall Length: 3 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Hot Dipped Galvanized, Material Type: Steel
Add to cart
1/2 in
3/8"-16
1/2 in
MKT FASTENING
3-1/4 in
2-3/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$3,48
$3,48
21DA99
instock
Drill Bit Size: 1/2 in, Thread Size: 3/8"-16, Anchor Diameter: 1/2 in, Brand: MKT FASTENING, Minimum Installation Depth: 3-1/4 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-5/8 in
3/8"-16
3/8 in
RED HEAD
1-3/4 in
2-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$73,03
$73,03
3A446
instock
Drill Bit Size: 3/8 in, Thread Length: 1-5/8 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: RED HEAD, Minimum Installation Depth: 1-3/4 in, Overall Length: 2-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-5/8 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
2-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$35,98
$35,98
21U980
instock
Drill Bit Size: 3/8 in, Thread Length: 1-5/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/8 in
1-3/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
2-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$55,94
$55,94
46U121
instock
Drill Bit Size: 3/8 in, Thread Length: 1-3/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-1/4 in
3/8"-16
3/8 in
APPROVED VENDOR
1-1/2 in
2-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$19,24
$19,24
31JP13
instock
Drill Bit Size: 3/8 in, Thread Length: 1-1/4 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/2 in, Overall Length: 2-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
1-3/16 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
2-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$93,12
$93,12
4KHT8
instock
Drill Bit Size: 3/8 in, Thread Length: 1-3/16 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
3/8 in
1-3/16 in
3/8"-16
0.812 in
3/8 in
MKT FASTENING
1-5/8 in
0.5625 in
2-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$33,16
$33,16
21U979
instock
Drill Bit Size: 3/8 in, Thread Length: 1-3/16 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.812 in, Anchor Diameter: 3/8 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
3/8 in
1-1/8 in
3/8"-16
3/8 in
RED HEAD
1-3/4 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$70,14
$70,14
3A445
instock
Drill Bit Size: 3/8 in, Thread Length: 1-1/8 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: RED HEAD, Minimum Installation Depth: 1-3/4 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
7/8 in
3/8"-16
0.8125 in
3/8 in
DEWALT
1-5/8 in
0.5625 in
2-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$51,70
$51,70
46U120
instock
Drill Bit Size: 3/8 in, Thread Length: 7/8 in, Thread Size: 3/8"-16, Washer Outside Diameter: 0.8125 in, Anchor Diameter: 3/8 in, Brand: DEWALT, Minimum Installation Depth: 1-5/8 in, Nut Width: 0.5625 in, Overall Length: 2-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
3/8 in
3/4 in
3/8"-16
3/8 in
APPROVED VENDOR
1-1/2 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$17,95
$17,95
31JP12
instock
Drill Bit Size: 3/8 in, Thread Length: 3/4 in, Thread Size: 3/8"-16, Anchor Diameter: 3/8 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/2 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
2-1/4 in
1/4"-20
1/4 in
RED HEAD
1-1/2 in
3-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$99,99
$99,99
3A444
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/4 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: RED HEAD, Minimum Installation Depth: 1-1/2 in, Overall Length: 3-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
2-1/4 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
3-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$17,43
$17,43
35T596
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 3-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
2-1/4 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
3-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$25,03
$25,03
21U978
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 3-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/4 in
2-1/4 in
1/4"-20
0.625 in
1/4 in
DEWALT
1-1/8 in
0.4375 in
3-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$70,36
$70,36
46U119
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: DEWALT, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 3-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
2-1/8 in
1/4"-20
1/4 in
APPROVED VENDOR
1-1/8 in
3-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$19,76
$19,76
31JP11
instock
Drill Bit Size: 1/4 in, Thread Length: 2-1/8 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/8 in, Overall Length: 3-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
1-3/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
2-1/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$127,64
$127,64
4KHT6
instock
Drill Bit Size: 1/4 in, Thread Length: 1-3/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1/4 in
1-3/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
2-1/4 in
Grade 2 Steel
Wedge
Zinc Plated
Steel
$16,57
$16,57
21U878
instock
Drill Bit Size: 1/4 in, Thread Length: 1-3/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
1-3/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
2-1/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$23,49
$23,49
21U977
instock
Drill Bit Size: 1/4 in, Thread Length: 1-3/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 2-1/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/4 in
1-1/4 in
1/4"-20
1/4 in
RED HEAD
1-1/2 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$92,88
$92,88
3A443
instock
Drill Bit Size: 1/4 in, Thread Length: 1-1/4 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: RED HEAD, Minimum Installation Depth: 1-1/2 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
1-1/4 in
1/4"-20
1/4 in
APPROVED VENDOR
1-1/8 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$417,51
$417,51
4XLT8
instock
Drill Bit Size: 1/4 in, Thread Length: 1-1/4 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/8 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
1-1/4 in
1/4"-20
0.625 in
1/4 in
DEWALT
1-1/8 in
0.4375 in
2-1/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$63,60
$63,60
46U118
instock
Drill Bit Size: 1/4 in, Thread Length: 1-1/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: DEWALT, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 2-1/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
1-1/8 in
1/4"-20
1/4 in
APPROVED VENDOR
1-1/8 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$21,17
$21,17
31JP10
instock
Drill Bit Size: 1/4 in, Thread Length: 1-1/8 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/8 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
3/4 in
1/4"-20
1/4 in
APPROVED VENDOR
1-1/8 in
2-1/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$1.288,25
$1.288,25
4YJP5
instock
Drill Bit Size: 1/4 in, Thread Length: 3/4 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/8 in, Overall Length: 2-1/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
7/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
1-3/4 in
Grade 5 Steel
Wedge
Zinc Yellow
Steel
$108,97
$108,97
4KHT5
instock
Drill Bit Size: 1/4 in, Thread Length: 7/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 1-3/4 in, Material Grade Material: Grade 5 Steel, Anchor Type: Wedge, Finish Type: Zinc Yellow, Material Type: Steel
Add to cart
1/4 in
7/8 in
1/4"-20
0.625 in
1/4 in
MKT FASTENING
1-1/8 in
0.4375 in
1-3/4 in
Grade 2 Steel
Wedge
Galvanized
Steel
$19,99
$19,99
21U976
instock
Drill Bit Size: 1/4 in, Thread Length: 7/8 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: MKT FASTENING, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 1-3/4 in, Material Grade Material: Grade 2 Steel, Anchor Type: Wedge, Finish Type: Galvanized, Material Type: Steel
Add to cart
1/4 in
3/4 in
1/4"-20
0.625 in
1/4 in
DEWALT
1-1/8 in
0.4375 in
1-3/4 in
Medium Carbon Steel
Wedge
Zinc Plated
Steel
$65,15
$65,15
46U117
instock
Drill Bit Size: 1/4 in, Thread Length: 3/4 in, Thread Size: 1/4"-20, Washer Outside Diameter: 0.625 in, Anchor Diameter: 1/4 in, Brand: DEWALT, Minimum Installation Depth: 1-1/8 in, Nut Width: 0.4375 in, Overall Length: 1-3/4 in, Material Grade Material: Medium Carbon Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart
1/4 in
5/8 in
1/4"-20
1/4 in
APPROVED VENDOR
1-1/8 in
1-3/4 in
Not Graded Steel
Wedge
Zinc Plated
Steel
$19,99
$19,99
31JP09
instock
Drill Bit Size: 1/4 in, Thread Length: 5/8 in, Thread Size: 1/4"-20, Anchor Diameter: 1/4 in, Brand: APPROVED VENDOR, Minimum Installation Depth: 1-1/8 in, Overall Length: 1-3/4 in, Material Grade Material: Not Graded Steel, Anchor Type: Wedge, Finish Type: Zinc Plated, Material Type: Steel
Add to cart