Anchors for Concrete, Block, & Brick
Anchors for Hollow Block & Brick
Anchors for Wet Concrete
Female-Threaded Anchors
Light-Duty Plug-Style Anchors
Quick Drive Anchors
Removable Bolt Anchors
Screw Anchors
Sleeve Anchors
Wedge Anchors
Bolt & Screw Caps
Captive Panel Screws
Collated Screws
Drilling & Tapping Screws
Eye Bolts
Hex Head Bolts
Machine Screws
Round Head Bolts
Set Screws
Shoulder Screws
Socket Head Cap Screws
Socket Screw Plugs
Square Head Bolts
Thumb Screws
U-Bolts
Collated Nails
Nails
Cage Nuts & Spring Nuts
Cap Nuts
Eye Nuts
Flange Nuts
Hex Nuts
Push Nuts & Retainers
Square Nuts
T-Nuts for Wood
Thumb Nuts
Weld Nuts
External Retaining Rings
Internal Retaining Rings
Round Shims & Arbor Shims
Shim Stock
Wedge Shims
Heat-Set Inserts
Helical Inserts
Self-Locking Inserts
Self-Tapping Inserts
Double-End Threaded Rods & Studs
Fully-Threaded Rods & Studs
Chains
Pallet Jacks & Container Tilters
High-Lift Pallet Jacks & Container TiltersFastener Length
Finish
Minimum Thread Length
Head Height
Head Style
Material Quality Standards
Head Width
Bolt Material
Dimensional Standards
Material Grade/Class
Tensile Strength
Made in North America
Thread Type
Pack Size
Neck Width
Overall Length
System of Measurement
Head Angle
Thread Direction
Thread Style
Thread Size
Standards
Clear Filters
Grade 2 Steel Square Neck Carriage Bolts
ر.ق15,91 ر.ق2.756,48Price range: ر.ق15,91 through ر.ق2.756,48
Grade 5 Steel Flat Head Square Neck Plow Bolts
ر.ق14,60 ر.ق1.275,71Price range: ر.ق14,60 through ر.ق1.275,71
Grade 5 Steel Dome Head Square Neck Plow Bolts
ر.ق48,51 ر.ق1.095,80Price range: ر.ق48,51 through ر.ق1.095,80
0
People watching this product now!
Fastener Length
Finish
Minimum Thread Length
Head Height
Head Style
Material Quality Standards
Head Width
Bolt Material
Dimensional Standards
Material Grade/Class
Tensile Strength
Made in North America
Thread Type
Pack Size
Neck Width
Overall Length
System of Measurement
Head Angle
Thread Direction
Thread Style
Thread Size
Standards
Price
2-1/2 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Bulk Pack
41/64 in
2-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق943,53
ر.ق943,53
4RWC3
instock
Fastener Length : 2-1/2 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Bulk Pack, Neck Width: 41/64 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
1-3/4 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق103,26
ر.ق103,26
1CFL7
instock
Fastener Length : 1-3/4 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
4 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
4 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق69,20
ر.ق69,20
1CFN6
instock
Fastener Length : 4 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3-3/4 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
3-3/4 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق67,42
ر.ق67,42
1CFN5
instock
Fastener Length : 3-3/4 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 3-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
3-1/2 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق70,34
ر.ق70,34
1CFN4
instock
Fastener Length : 3-1/2 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
Zinc Plated
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
3-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق87,09
ر.ق87,09
1CFG7
instock
Fastener Length : 3-1/2 in, Finish: Zinc Plated, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Bulk Pack
41/64 in
3 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق1.033,06
ر.ق1.033,06
4RWC7
instock
Fastener Length : 3 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Bulk Pack, Neck Width: 41/64 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
3 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق57,31
ر.ق57,31
1CFN3
instock
Fastener Length : 3 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2-3/4 in
Inch
80 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق49,97
ر.ق49,97
1CFN2
instock
Fastener Length : 2-3/4 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق48,51
ر.ق48,51
1CFN1
instock
Fastener Length : 2-1/2 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
Zinc Plated
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق55,99
ر.ق55,99
1CFG5
instock
Fastener Length : 2-1/2 in, Finish: Zinc Plated, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2-1/4 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق117,46
ر.ق117,46
1CFL9
instock
Fastener Length : 2-1/4 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2 in
Black Oxide
2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Bulk Pack
41/64 in
2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق1.095,80
ر.ق1.095,80
4RWA4
instock
Fastener Length : 2 in, Finish: Black Oxide, Minimum Thread Length: 2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Bulk Pack, Neck Width: 41/64 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق107,16
ر.ق107,16
1CFL8
instock
Fastener Length : 2 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2 in
Zinc Plated
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق56,39
ر.ق56,39
1CFG3
instock
Fastener Length : 2 in, Finish: Zinc Plated, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
Zinc Plated
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
1-3/4 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق72,96
ر.ق72,96
1CFG2
instock
Fastener Length : 1-3/4 in, Finish: Zinc Plated, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
Black Oxide
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
1-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق229,26
ر.ق229,26
1CFL6
instock
Fastener Length : 1-1/2 in, Finish: Black Oxide, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
Zinc Plated
1-1/2 in
33/64 in
Countersunk
SAE J429
5/8 in
Steel
ASME B18.9
Grade 5
120,000 psi
No
Coarse
Small Pack
41/64 in
1-1/2 in
Inch
80 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
ر.ق104,17
ر.ق104,17
1CFG1
instock
Fastener Length : 1-1/2 in, Finish: Zinc Plated, Minimum Thread Length: 1-1/2 in, Head Height: 33/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Tensile Strength: 120,000 psi, Made in North America: No, Thread Type: Coarse, Pack Size: Small Pack, Neck Width: 41/64 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart